How to Make Quick Configuration on Telepro Announcements?
When you press and hold the HORN and TEST buttons for 3 seconds at the same time, all LEDs will light up, the buzzer will make an audible warning and 1. The channel LED will start flashing.
For each digital signal input, the horn and bell auxiliary relay outputs are selected by pressing the HORN button.
Green colored LED Bell is the output of the red LED Horn.
You can scroll through the channels by pressing the TEST button and assign the relevant channel as a horn and bell by pressing the HORN key.
After making all the channel settings, you can set the settings by pressing the ACK button or cancel the configuration by pressing the RESET button.
If you do not press any buttons for 60 seconds, the configuration mode will exit.