ERP1000 Sequential Event Recorder System Dashboard

SKU: ERP-1000
  • Flexible structure: 1,000 signal capacity (can be increased up to 5,000). If there is an ISP announcer in the existing system, events can be recorded by adding them to the system.
  • Possibility of quick troubleshooting thanks to the modular structure.
  • Installation and user manual in Turkish.
  • Compact industrial server computer without built-in fan.
  • 17″ LCD Screen, 1u, 19″ Drawer KVM console.
  • Easy Turkish Programming with IspsimTM Software.
  • Self-directed and Remote monitoring and Reporting withIspoperatm Software.
  • Live monitoring of alarms; Possibility of online monitoring of multiple centers with the same software (Wide Area Monitoring).
  • modern warning methods; SMS and e-mail sending feature.
  • User authorization.
  • Alarms can be received continuously from the printer without a computer.
  • Updates and upgrades can be made remotely.
  • Tested and certified in EN61000-2/EN61000-4 standards.

 


 

The new HEEP-3000 Model Event recorder system provides the most advanced monitoring, alarm notification and event recording in all electrical facilities from electricity generation, transmission and transmission to distribution in electricity networks, and helps to easily find the fault as a result of the evaluation of this data. Thanks to the high-speed input modules of this system, Event recorder equipment, the operator will be aware of the very rapid changes in the operation very quickly from the local KVM LCD screen or a remote PC. In addition, access to the most critical signals via SMS and/or e-mail is provided.

While 30,000 events are recorded in the Event Recorder, which will be used to disconnect from the PC, it keeps 2,000 events in its own memory in the input module in case the communication between the Input Module and the HEEP3000 is lost. The horn and bell assignments of each of the channels of the Input Modules are easily done with the user-friendly ISPSIM™ software running on the windows operating system.

Remote monitoring and reporting has become very easy with ISPOPERA™ software. Thanks to this software, the operator has access to easily understandable event log information.

The complete system consists of input modules, peripherals such as event recorder and compact type server computer, KVM console and switch HUB.

  • Check Mark 5 Year Warranty
  • Check Mark 1 Hour Online Product Training
  • Check Mark Domestic Goods - Made in Turkey
SKU: ERP-1000 Category:

MODULAR STRUCTURE

ERP-10000 Event Recorder Panel has a compact structure with dimensions of 800x2100x800. Its modular structure offers the opportunity to quickly change the unit in case of failure and easy service within the panel.

HEIM-48 INPUT MODULES
  • 2,000 Event Memories
  • 48 Signal Inputs

  • RS485 Communication Port
  • 19″ 1U Rack Type Compact Design
  • Ability to Operate at Different Voltage Levels (110/220Vdc)
  • Temperature, Short Circuit, Overcurrent/Voltage Protection

 

HEEP-3000 EVENT RECORDER-RTU

General Features

  • Comprehensive, high quality and the most economical RTU model with event recorder,
  • It includes high-performance microprocessor control,
  • It provides high performance and economical solutions in SCADA and control applications.

  • Thanks to its rack-type, 19″, 1U compact design, it can be easily mounted in the panel,
  • 124 HEIM connection capacity,
  • All entrances are completely isolated. They are protected by optical couplers and noise filtering software
  • Ability to work in a wide temperature range,
  • Built-in long-life battery for system clock,
  • Manual re-start via 2 buttons on the front panel
  • 1ms resolution
  • Programmable 3-250ms Response Time
  • Supply input 110/220VDC

 


Software Features
;

  • It can save up to 30,000 events in its own memory to be used for RTU-PC disconnection,
  • 5,000 Signals Support
  • To be able to synchronize real time between centers in IRIG-B time format via GPS with 1msn resolution,
  • The unit can be easily configured with ISPConfig™ via the USB port on the front panel.
  • With a unique IP-based software, it is possible to easily monitor and report events for analysis purposes (IP-Based Remote Monitoring with ISPOpera™ Software) Possibility to monitor and control from 8 different computers at the same time.


Hardware Features
;

  • Built-in isolated Centronix Printer Port
  • With 4 buttons on the Front Panel and LCD (2×20) Display, configurations within the device can be controlled (IP Settings, Test Options, real time tag, device status information)
  • 24pcs LED display for diagnostic purposes
  • 2 Programmable / 1 Fixed (Fault) Relay Output
  • 4pcs isolated RS485 and 2pcs isolated “RS485/RS232” outputs
  • 1pcs isolated USB port,
  • 1x 10/100 Ethernet Port
  • Modbus RTU and Modbus TCP Protocol Support
  • 1pcs dedicated BNC connector input for IRIG-B.
SYSTEM CONFIGURATION AND MONITORING SOFTWARE

ISPSIM Software

 

With ISPSIM™ software; relay selection (Horn – Bell), response and release times and ModbusID settings can be performed. According to the models (24 Channels and Above), ISA18.1 Sequence Code M (Manual RESET) code is optionally offered. Device Firmware updates are also made with ISPSIM™ software. In addition, the operation of the device can be simulated through the installed configuration. It also helps to determine the Horn and Cymbal outputs as active or passive. You can download ISPsim

TM

software here.

 

ISPOPERA Software

With ISPOPERA™ software; Remote monitoring of event recordings via HEEP-3000 RTU can be done for up to 8 (ISPOPERA™ or SCADA) users. It will be sufficient to transfer the Station ID and IP address specified in the HEEP-3000 configuration to ISPOPERA™. The software will provide you with extensive monitoring options. It has main privileges such as selection between stations, monitoring by distinguishing events (ACK, SET, CLEAR), and monitoring on a module basis. ISPOPERA™software can be printed instantly or at any time via the installed computer.

It offers real-time event recording with GPS time synchronization between stations. Recordings can be stored at the central station with the help of SERVER. It offers a unique and flawless solution with the possibility of recording events in 1 msn resolution. You can download ISPoperaTM

software here.

ADJUSTABLE RESPONSE AND RELEASE TIMES

Adjustable response-release times are available with software control that offers flexible and reliable operation against magnetic fields that may occur during maneuvers. With ISPSIMTM software; Response and release times can be set from 3ms to 250ms. Company output values are used as 5ms for reaction time and 20ms for release time.

 

CERTIFICATES & APPROVALS FOR HEEP-3000 AND HEIM-48

CE Certification : CE (ESIM)

EMC Compliance :

EN 61000-4/-2 (+A1/ +A2 Dielectric Withstand)

EN 61000-4-3 (Radiated RFI Immunity)

EN 61000-4-4 (Electrical Fast Transient)

EN61000-4-5 (Surge Immunity)

EN61000-4-6 (Conducted RFI Dist. Immunity)

EN61000-4-8 (Radiated Power Freq. Immunity)

EN61000-4-11(Unity to Voltage dips)

EN61326-1 (Equipment for Measurement)

EN55011 (+A2 Emission – Ind. Sci. & Med.)

LVD Compatibility :EN61010-1 :1993

Documents